USB High-Speed Power Delivery Series

FTDI's power delivery series has up to two Type-C/PD ports, with the PD1 port supporting both power sink and source roles (initial sink) and the PD2 port only supporting a power sink port role. Both PD ports support 5 V, 9 V, 12 V, 15 V, and 20 V PDO profiles, and these profiles are configurable through the external EEPROM at power-up or reset. The PD1 port shares the same Type-C connector with USB data, and the PD2 port is a power port only without USB data.

Features

• Supports PD specification Rev 3.0
• 2x USB PD 3.0 port support; Port 1 supports dual role swap function while Port 2 supports sink mode with charging function through to Port 1
• Supports 5 V, 3 A; 9 V, 3 A; 12 V, 3 A; 15 V, 3 A; and 20 V, 3 A PDOs as a sink or source Type-C/PD physical layer protocol
• PD policy engine using a 32-bit RISC controller with 8 kB data RAM and 48 kB code ROM
• PD mode configuration through an external EEPROM
• Option to use an external MCU controlling PD policy through the I²C interface (available under NDA)
• USB bridge with Type-C/PD (chargers and devices)
• High-power application via USB PD and/or Type-C port
• Get power from USB device functions, e.g. portable USB host needs charging when USB is connected
• PDA to USB data transfer
• USB smart card readers
• USB instrumentation
• USB industrial control