This document provides detailed hardware requirements and board connections for the X-NUCLEO-IDW01M1 Wi-Fi board based on SPWF01SA Serial-to-Wi-Fi Modules, to allow expansion of the STM32 Nucleo boards. The SPWF01SA module is FCC (FCC ID: VRA-SG9011203), IC certified (IC: 7420A-SG9011203) and CE certified and includes an STM32 MCU, a low-power 2.4 GHz IEEE 802.11 b/g/n transceiver with integrated power amplifier and power management, and an SMD antenna.
The X-NUCLEO-IDW01M1 can be plugged onto STM32 Nucleo boards thanks to the ST morpho and Arduino™ UNO R3 connectors, and the same connectors allow different expansion boards to be easily stacked on the X-NUCLEO-IDW01M1 board so you can evaluate Wi-Fi connectivity with different devices in several applications.
| Manufacturer | STMicroelectronics |
|---|---|
| Category | Wireless Communication |
| Sub-Category | Transceivers - TXRX |
| Eval Board Part Number | 497-16245-ND |
| Eval Board Supplier | STMicroelectronics |
| Eval Board |
Normally In Stock
|
| Protocol |
Wi-Fi 802.11b/g
|
| Data Rate |
1 Mbps
|
| Frequency |
2.45 GHz
|
| Range |
- Not Given
|
| Features |
Antenna On-Board
Certified CE Certified FCC Certified ICS Memory Available On-Board Security via WEP Security via WPA2-PSK (AES) Security via WPA-PSK (TKIP) TCP/IP Networking Stack UART |
| Component Count + Extras |
37 + 17
|
| Design Author |
STMicroelectronics
|
| Application / Target Market |
Factory Automation
Home Automation Medical Wireless Sensor |
| Main I.C. Base Part |
SPWF01SA.11
|
| Date Created By Author | 2015-11 |
| Date Added To Library | 2017-04 |
