 |
AUTOMOTIVE |
Key Components for Off-Road Equipment
CAPACITORS
981 HE Throttle Position Sensor
Non-Contacting Technology: Hall Effect
Features
- Accurate linearity down to: ± 0.5 %
- Designed for applications in harsh environments
- Spring-loaded types available
 981 HE
|
RESISTORS, VARIABLE
NTCS0603E3
Glass-Protected SMD 0603 NTC Thermistors
Features
- Tolerance on R25 down to 1 %, and on B25/85 down to 1 %
- High operating temperature up to 150 °C
- AEC-Q200 qualified
NTCS0603E3 |
RESISTORS
TNPW e3 Series
High Stability Thin Film Chip Resistors
Features
- Low temperature coefficient and tight tolerances: ± 0.1 %, ± 10 ppm/K
- Excellent overall stability at harsh environmental conditions
- AEC-Q200 qualified, automotive grade
- Case sizes: 0402 to 1210
TNPW e3 |
RESISTORS
PAT - Automotive Qualified Tantalum Nitride Chip Resistor
Precision Thin Film Chip Resistor
Features
- Moisture-resistant tantalum nitride thin film chip resistor
- Wide resistance range: from 10 Ω to 3 MΩ; tolerance down to 0.1 %
- 0.05 % stability at 2000 h, 70 °C
- AEC-Q200 qualified
PAT |
OPTOELECTRONICS
TCUT1300
Compact Transmissive Sensor
Features
- Single- and dual-channel
- Wide gap of 3 mm
- High temperature operation: up to 105 °C
- Compact surface-mount package
TCUT1300 |
|
RESISTORS, VARIABLE
34 THE
Bushing Mount Hall Effect Sensor
Features
- Accurate linearity down to ± 0.5 %
- Very long life: 50 M cycles for servo, 10 M cycles for bushing
- All electrical angles available up to 3600°
- Designed for applications requiring long life
34 THE |
RESISTORS, NON-LINEAR
NTHS0603
SMD NTC 0603 Chip Thermistor
Features
- Tolerance on R25 down to 1 %
- High-density monolithic construction with glass overcoat
- Wide operating temperature range: - 40 °C to + 125 °C
NTHS0603 |
RESISTORS
ACAS 0606 AT, ACAS 0612 AT - Precision
Precision Thin Film Chip Resistor Arrays
Features
- TCR tracking dow to 10 ppm/K (± 5 ppm/K)
- Tolerance matching down to 0.1 % (± 0.05 %)
- AEC-Q200 qualified
- Resistance ratio up to 1:20
ACAS 0606 AT, ACAS 0612 AT - Precision |
DIODES
BZX84Bxxx
Silicon Planar Small-Signal Zener Diode
Features
- Zener voltages are graded according to the international E 24 standard
- Standard Zener voltage tolerance is ± 5 %; replace "C" with "B" for 2 % tolerance
- AEC-Q101 qualified
- RoHS-compliant
BZX84-V Series |
OPTOELECTRONICS
VEMT3700
High-Speed Phototransisitor in PLCC2 Package
Features
- Spectral sensitivity from 450 nm to 1080 nm
- Half angle of sensitivity ± 60°
- Collector light current, typical, 0.5 mA with Ee = 1 mW/cm2
VEMT3700 |
RECTIFIERS
S1G
400 V, 1 A Standard Rectifier in SMA
Features
- Glass-passivated chip technology
- Ideal for automated placement
- Meets MSL level 1
- RoHS-compliant
S1G |
RESISTORS
NOMCA
Molded Precision Resistor Network
Features
- Moisture-resistant tantalum nitride film
- Tight stability of 0.05 % at 1000 h, 125 °C
- Tight TCR tracking of 5 ppm/°C
- Ratio tolerance down to 0.05 %
NOMCA |
CAPACITORS
VJ...31/VJ...34
AEC-Q200 Qualified Multilayer Ceramic Chip Capacitors
Features
- C0G (NP0), X7R, and X8R dielectric
- Case sizes: 0402 to 1812 and voltages up to 3000 VDC
- Operating temperature up to + 175 °C (above + 125 °C derating)
- AgPd termination available for epoxy bonding
VJ...31/VJ...34 |
RECTIFIERS
US1G
400 V, 1 A Ultrafast Rectifier in SMA
Features
- Glass-passivated chip technology
- Ideal for automated placement
- Meets MSL level 1
- RoHS-compliant
US1G |
OPTOELECTRONICS
VLMW41R1T1
White LED in PLCC-2 Package Based on InGaN Technology
Features
- Typical color temperature: 5500 K
- Luminous intensity of 180 mcd to 450 mcd
- Viewing angle: ± 60°
- Operating temperature from 40 °C to 100 °C
VLMW41R1T1 |
DIODES
3KASMC24
3000 W Surface-Mount PAR® TVS
Features
- Junction passivation optimized design passivated anisotropic rectifier technology
- TJ = 185 °C capability; suitable for high-reliability and automotive requirements
- Available in unidirectional polarity only
- 3000 W peak pulse power capability with a 10/1000 µs waveform
3KASMC24 |
OPTOELECTRONICS
TCUT1300
Compact Transmissive Sensor
Features
- Single- and dual-channel
- Wide gap of 3 mm
- High temperature operation: up to 105 °C
- Compact surface-mount package
TCUT1300 |
INDUCTORS
IHLP-1616AB
Low-Profile, High-Current IHLP® Inductor
Features
- AEC-Q200 qualified
- Shielded construction
- Handles high transient current spikes without saturation
- Ultra-low buzz noise due to composite construction
IHLP-1616AB-1A IHLP-1616AB-A1 |
RESISTORS
MM_/SMM
Precision Thin Film MELF Resistors
Features
- AEC-Q200 qualified, automotive grade
- Available from 10R to 15M
- TC down to 5 ppm/K, tolerance down to ± 0.02 %
- Unrivaled pulse load robustness
MMU 0102 HF, MMA 0204 HF, MMB 0207 HF
MMU 0102, MMA 0204, MMB 0207 - Precision
MMU 0102, MMA 0204, MMB 0207 - Professional
MMU 0102 VG03, MMA 0204 VG03, MMB 0207 VG03
SMM0102
SMM0204 .... EN803 E8
SMM0204
SMM0207 |
|
