Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Product List
As a final design verification step, a Bode plot and output impedance plot of the design is shown. The Bode plot can be used to determine if the R4 gain parameter is set correctly (bandwidth below ½ the switching frequency, sufficient phase margin) and if the selected output caps will meet the desired transient conditions, Zout below the blue Ztarget line.
