Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Product List
Once confirmed that all routers are connected, the next step is to look at the routing information. To see this, run the "rplsr" command on the border router. This shows that router 3 and router 2 are connected to the border router, and router 4 is connected to router 3. The connections currently look like the schematic on slide 16. Therefore, the demonstration of the self-forming capability of Wi-SUN technology has been achieved.
PTM Published on: 2023-04-19
