Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Product List
It is essential that the products are used within their correct design guidelines. All gap filling materials should be used under compression for optimum thermal performance. Ideally, this compression should be from 20 to 45%, based on the original thickness. This allows the product to wet the surface and form a good interface between the source and the sink. For use outside of the parameters stated in the datasheets, please contact T-Global directly.
PTM Published on: 2012-04-09
PTM Updated on: 2015-06-19
