Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Product List
In the example shown, the conductor current is 1 A and there are 100 turns on the CT winding. If a 10 Ω burden is applied to the CT winding, a current of 1/100 or 10 mA flows through the CT winding, producing a voltage of 100 mV across the burden resistor. This voltage is proportional to the conductor current and it is therefore now possible to monitor or measure any variations in the conductor current.
PTM Published on: 2016-02-24
