Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Slide 30
Slide 31
Slide 32
Slide 33
Slide 34
Slide 35
Slide 36
Slide 37
Slide 38
Slide 39
Slide 40
Slide 41
Slide 42
Product List
Typically the impedance matching adjustments are made using the calibrator output of the oscilloscope. As can be seen on this slide, the top trace is peaked too high, the black trace in the middle is correct, and the red trace is rolled off, the opposite of peaking. This is a common adjustment on passive probes.
PTM Published on: 2012-04-26
