Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Product List
When switching, huge inrush currents must be avoided and a designer tasked with creating slew rate control would need a lot of components to have a robust solution. This circuit is an example of a high side power switch with active HIGH operation. Take note that if VOUT is greater than VIN this is no longer a switch but a diode. A good power switch incorporates slew rate control and repairs the diode issue.
PTM Published on: 2020-11-10
