Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Product List
When designing with snap acting switches, it is recommended that no force be applied in the FP. A gap distance of 0.05mm - 1.5mm is recommended with a Total Travel Pushed (TTP) not to exceed the Over Travel (OT) distance. The OT distance is the total distance past the OP (the switched point) of the switch.
PTM Published on: 2011-12-07
