Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Product List
The SCON0 register is used to select the serial port operation mode and enable/disable UART reception. The mode of operation is configured by programming the S0MODE bit. For 8-bit UART mode, set the bit to 0. TI0 and RI0 are the Transmit Interrupt Flag and Receive Interrupt Flag, respectively. The REN0 bit is used to enable the receiver to start accepting data from another UART peripheral.
PTM Published on: 2011-02-07
