Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Product List
Here is a code segment to initialize the UART0 peripheral. It uses Timer 1 to generate the baud rate at 57,600 using the 8-bit auto reload mode. The reload value is stored in TH1, and that value is also used to initialize the timer register itself so that the first count sequence is the correct length. The CKCON register sets the clock source for the timer to be the system clock at 24.500000Hz and the SCON register enables the receiver and sets the UART mode to 8-bit.
PTM Published on: 2011-02-07
