Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Product List
It is essential to consider the maximum pressure that can be placed on the components. For example, if a BGA is used, the maximum pressure applied must be minimised. In this case, a proper solution would be to use a softer gap filler or a putty. A putty could be especially effective as it can be compressed by as much as 90% with pressures as low as 2 PSI.
PTM Published on: 2012-04-09
