Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Product List
Shown here is the block diagram of the internal power rails described previously. The DVDD pin is the 1.8V input power to the digital logic. When the Enable pin goes logic level high, the NVM, or non-volatile memory, is loaded in the active RAM. If the enable pin is logic high before the 1.8V input is stable, the start-up logic may not sequence properly and the RAM will not be loaded.
PTM Published on: 2013-09-19
