Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Slide 30
Slide 31
Slide 32
Slide 33
Slide 34
Slide 35
Slide 36
Slide 37
Product List
Most circuits accept -20dB as a reasonable working level, however some circuits can work with isolation levels below 20 dB. Reed relays typically isolate signals down to -40 dB at lower frequencies (1 MHz to 200 MHz) and fall off to -20 dB in the 2 GHz to 3 GHz range. The diagram shown here illustrates relay contacts where a pulse is incident on one end of the open contacts. Note that a small part of the signal leaks through the contacts at the higher frequencies.
PTM Published on: 2012-07-23
