Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Slide 30
Product List
To get the ideal RF performance requires the designers using the reed relays to coordinate the PCB layout to accept the reed relay leads maintaining a 50 Ω impedance. The designers’ testing should compare or be similar to Standex Electronics’ testing approach. If this is not the case, the RF performance will not be comparable.
PTM Published on: 2013-08-13
