Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Slide 30
Product List
To match Standex-Meder’s RF reed relay testing results the designer many times will need to add some circuitry in the form of inductance and capacitance at the input and output of the reed relay. This ‘tweaking’ is usually required because the geometries of the PCB and the reed relay will be slightly different. The designer is also matching other components on the PCB nearby the reed relay as well.
PTM Published on: 2013-08-13
