Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Slide 30
Slide 31
Slide 32
Slide 33
Slide 34
Slide 35
Slide 36
Slide 37
Slide 38
Slide 39
Slide 40
Slide 41
Slide 42
Slide 43
Slide 44
Slide 45
Slide 46
Slide 47
Slide 48
Product List
Up to this point in the presentation only full step or half step operation has been discussed. These motors are limited to 4 or 8 positions per electrical cycle, and are naturally achieved by controlling the phase relationship of the currents without changing the magnitude. For applications that require higher resolution in positioning, it is possible to drive a stepper motor to positions between the full and half step positions. This is generally referred to as microstepping.
PTM Published on: 2011-12-14
