Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Slide 30
Product List
The second commonly used architecture is the low voltage positive area. An example of this is a 12V storage system where the main power switch is on the high side with the hot swap controller residing there also. The ADM1177 is shown in this configuration. In this case, the gate voltage needs to be higher than the main supply to enhance the N-channel MOSFET. The ADM1177 also integrates digital power monitoring to allow the user to digitally read back the voltage and the current.
PTM Published on: 2008-04-29
