Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Slide 30
Product List
During power-up and throughout normal operation, the hot swap controller will monitor and control the main system current. In the event of an over-current condition, the controller will limit the current to a preset value for a time defined by a TIMER capacitor. Then the controller will disable the main pass FET and signal a fault or retry power-up if applicable.
PTM Published on: 2008-04-29
