Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Slide 30
Product List
Ideally this MOSFET can survive this power combination for a maximum of 8ms. However, due to tolerances and other variations, it is advisable to design in a margin of error. Therefore, a value lower than this should be selected, somewhere between 1 to 5ms for example. Once this time is obtained, the TIMER capacitor is calculated as shown.
PTM Published on: 2008-04-29
