Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Slide 30
Slide 31
Slide 32
Slide 33
Slide 34
Slide 35
Slide 36
Slide 37
Slide 38
Slide 39
Slide 40
Slide 41
Slide 42
Slide 43
Slide 44
Slide 45
Slide 46
Slide 47
Slide 48
Product List
Ideally a motor should start at full speed and stop on command. However, for most applications this is not possible. Think for a moment about how a brushed DC motor responds to an instantaneous step in the input voltage from zero to full voltage. It will naturally accelerate up to full speed and then run at full speed. The equivalent operation for a stepper motor should be considered.
PTM Published on: 2011-12-14
