Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Product List
An overmold is the part that covers the joint between the connector and wire, to prevent the wire from bending or pulling at the solder joints, which could eventually lead to failure. The overmold also plays the secondary function of adding aesthetics to the cable. An overmold is more pleasant to see and touch than exposed solder joints.
PTM Published on: 2013-02-01
