Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Slide 30
Product List
When hardware is in P2P mode, LED1 & LED 2 will alternately be flashing. The LED on PAD3 is solid, because one of the NFC Modes has been selected. When an NFC device is presented, the mode which is being used by the hardware (initiator or target) will go solid. After the communication is terminated, the LEDs will go back to alternately flashing.
PTM Published on: 2014-01-29
