Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Slide 30
Slide 31
Product List
Unplug the JTAG ribbon cable from the Xplained MCU board, disconnect and reconnect the USB cable. The code will now start the Xplained board and begin to communicate using the USB connection. Use a terminal emulator program to receive the instructions from he board and select the appropriate Com port and a baud rate of 115,200.
PTM Published on: 2012-04-04
