Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Product List
The Kona range uses a cable-to-board configuration. The male connector is a vertical PCB-mounted through-board connector with 4.5 mm PCB tails. The female connector is cable-mount, with housings and contacts available separately. For the 8 AWG equipment wire, Harwin recommends silicone rubber insulation with a 7.5 mm maximum insulation diameter.
PTM Published on: 2021-03-03
PTM Updated on: 2023-12-13
