Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Product List
Either an external 0 to 5V signal or an external 0 to 1 kΩ resistor can be used to program the HFE output voltage over a wide range. AC Fail and DC Good signals identify the status of the input and output. The units can be electronically turned ON and OFF using either the inhibit or enable function.
PTM Published on: 2012-10-10
